KitchenAid KHBRV00 Manual Del Propietário página 6

LED Legend Indication:
○ = ON
� = OFF
⛭ = FLASH
NOTE: When the Battery is installed or when the appliance is operated, the Battery charge
status LEDs will display for 5 seconds and then turn off. If the Battery charge is 10% or less,
the indication light will continue to flash until the unit is no longer in use or Battery is removed.
Full Charge:
The Battery will be fully charged in around 3 hours.
NOTE: It is best to store the Cordless Hand Blender at room temperature.
PRODUCT USAGE
NOTE: Do not place the adapter in an area of extreme heat or cold. It will work best at normal
room temperature.
IMPORTANT: Make sure that the Variable Speed Controller is not pressed and the Battery is
removed before attaching or removing parts or accessories.
1.
Insert the Battery on the Battery slot located at the top of the appliance, making sure it is
aligned. The LED will light and display the Battery level for five seconds, then turn off.
2.
If using a Pan Guard, place it on a flat surface. To insert the Pan Guard, angle the
Blending Arm to one side of the mounting clip. Then, gently pull the other mounting clip
outward and push down the Blending Arm. Ensure the Mounting Clips are secured into
place.
3.
Insert the Cordless Hand Blender into the mixture. Press and hold the unlock button first,
then the Variable Speed Controller to start. Use your free hand to cover the top of the
Blender jar for better stability and to avoid splashing. The LED will light and display the
Battery level for five seconds, then turn off.
NOTE: Do not immerse Motor Body into liquids or other mixtures.
4.
Use the draw up motion with the Cordless Hand Blender to move the ingredients within the
Jar. Slowly draw it upwards against the side of the Jar. Repeat the process until the
ingredients are at the desired consistency.
CARE AND CLEANING
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance. Make sure that the Variable Speed Controller is not pressed
and the Battery is removed before attaching or removing parts or accessories.
1.
Remove the Blending Arm or Pan Guard before cleaning.
2.
Dishwasher-safe parts — top rack only: Pan Guard, Blender Jar, and Lid.
Wash Blender Arm in hot, soapy water.
3.
Wipe the Motor Body with a damp cloth. Mild dish soap may be used, but do not use
abrasive cleansers.
For detailed information on the Cordless Hand Blender:
Visit www.kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes,
and tips on how to use and clean your Cordless Hand Blender.
LIMITED WARRANTY AND SERVICE
®
KITCHENAID PRODUCT WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA,
PUERTO RICO, AND CANADA
This limited warranty extends to the original purchaser and any succeeding owner for the product operated in the 50 United States, the
District of Columbia, Puerto Rico, and Canada.
Length of Warranty: One Year Limited Warranty from date of delivery.
6