Casals CSG3620 Instrucciones De Uso página 7

EN
(Original instructions)
CSG3620
Li-ion Battery powered tacker for common
use.
ORIGINAL INSTRUCTIONS
Dear Customer,
Many thanks for choosing to purchase a
Casals brand product.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals
develops electric Power Tools for the toughest
jobs.
READ THE SAFETY ADVICE AND
WARNINGS BOOKLET BEFORE USING THIS
PRODUCT.
TACKER SAFETY WARNINGS
Always assume that the tool contains
fasteners. Careless handling of the tacker can
result in unexpected firing of fasteners and
personal injury.
Do not point the tool towards yourself or
anyone nearby. Unexpected triggering will
discharge the fastener causing an injury.
Do not actuate the tool unless the tool is
placed firmly against the workpiece. If the
tool is not in contact with the workpiece, the
fastener may be deflected away from your
target.
Disconnect the tool from the power source
when the fastener jams in the tool. While
removing a jammed fastener, the tacket may
be accidentally activated if it is plugged in.
Use caution while removing a jammed
fastener. The mechanism may be under
compression and the fastener may be
forcefully discharged while attempting to free a
jammed condition.
Do not use this tacker for fastening
electrical cables. It is not designed for
electric cable installation and may damage the
insulation of electric cables thereby causing
electric shock or fire hazards.
PRODUCT DESCRIPTION AND
SPECIFICATIONS
DESCRIPTION
A Trigger switch
B Soft Touch handle
C Safety Switch
D Magazine
E Stapple charge viewer
F Charging port
G On/Off switch
H Battery indicator
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
SPECIFICATIONS
Accesoris fitting this appliance:
Stapples: Type 53, 8-12 mm
Nails: Type 47, 8-12 mm
Declaration of noise emission values:
L 65.3 dB(A)
pA
K 3 dB(A)
pA
L 76.3 dB(A)
WA
K 3 dB(A)
WA
Declaration of the vibration emission value:
Work mode–vibration emission: 3.224 m/s
Uncertainty K: 1.5 m/s
Measured sound level determined according
EN 60745-1
The vibration emission level given in this
information sheet has been measured
according EN 60745-1 and may be used to
compare one tool with other. It may be used for
a preliminary assessment of exposure.
The vibration value during actual use of the
power tool can differ from the declared total
.
2
.
2