Casals CSG3620 Instrucciones De Uso página 9

nails, check there's one side marked below the
magazine to place them correctly.
Close again de magazine and your stapler is
ready to go.
Stappling/Nailing
Hold the stapple gun flat against the surface
you want to work on, ensuring the safte switch
(G) is pressed by the surface.
Pull the trigger to fire a stapple or a nail into the
object being worked on.
Release the pression and continue with your
work.
NOTE: If you don't pressure the safety switch,
it will be impossible to release the tapple, so
always apply some pressure on the appliance.
WARNING: This appliance is not suitable for
fixing electrical cables.
WARNING: Do not press the release trigger
while holding the safety switch with your
fingers. You may be harmed in a painful way.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
Once you are finished, switch off the appliance
by using the main power switch
Clean and store the appliance.
MAINTENANCE AND CARE
WARNING Always switch off the machine
before carrying out work on it or changing the
magazine charge.
CLEANING
Disconnect the appliance from the USB charge
or switch it off and allow it to cool before
undertaking any cleaning task.
Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
SUPPLIES
Supplies can be acquired from distributors and
authorised establishments for your appliance
model. They are generic supplies.
These supplies are available in specialist
shops.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
If the connection to the mains has been
damaged, it must be replaced, take the
appliance to an authorised technical support
service. Do not attempt to disassemble or
repair the appliance by yourself in order to
avoid a hazard.
If any anomaly is detected, check the following
table:
Anomaly: Machine has lost power.
→ Cause: Battery is not charged enough
Allow to cool down the appliance when doing a
repetitive work.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations of
substances that could be considered harmful to
the environment.