Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING/DETACHING
BATTERY
NOTE: Fully charge battery pack before
first use.
To Attach
Align the battery ribs with the mounting
slots in the machine's battery port and
slide the battery pack until it snaps into
position (Fig. 5a).
To Detach
Always be aware of the location of your
feet, children, or pets when pressing the
battery-release button. Serious injury
could result if the battery pack falls.
NEVER remove the battery pack at a high
location.
1 Depress the battery-released button
and the battery pack will disengage from the latch (Fig. 5b).
2. Grasp the battery pack and remove it from the machine.
MOUNTING THE DOUBLE-SHOULDER STRAP
1. Put the double-shoulder strap on your body and insert the two parts of the strap
buckle into each other until a click is heard (Fig. 6a).
2. Insert the carabiner hook of the hip pad into hole of the shoulder strap loop fixed
on the shaft, and press the shaft down softly (Fig.6b & 6c & 6d).
3. Hold the brush cutter with both hands on the right side of your body (Fig. 6e). The
blade should be parallel to the ground at a proper cutting distance without the
need for the operator to bend over.
4. Releasing the brush cutter can be achieved in two ways: release the strap buckle
(Fig. 6f) or press the carabiner of the strap and remove the hook from the loop
fixed on the shaft (Fig. 6b).
24
56-VOLT LITHIUM-ION COMMERCIAL 12" BRUSH CUTTER — BCX4500/BCX4500-FC
5a
Mouting Slot
5b
2
Rib
1
Publicidad
