For Eu Countries Only; General Safety Instructions - JB INDUSTRIES DMG-5 Instrucciones De Uso

MARKING IN THIS DOCUMENT
Danger
This sign warns against the danger of personal injuries.
Caution
This sign warns against the danger of property
damage and damage to the environment.
Call for action

FOR EU COUNTRIES ONLY:

Do not discard power tools with household waste! According to European Directive
2002/96/EC on discarded electrical and electronic devices, and its implementation
international law, power tools that can no longer be used must be collected and
handed over for environmentally sound recycling.

General safety instructions ................................................................................... 4

Technical data ..................................................................................................... 5
DMG-5 basic functions ........................................................................................ 5
Using the DMG-5 (e.g. evacuation and filling) ..................................................... 6
Evacuation and filling ..................................................................................... 6
Heat Pump Mode ........................................................................................... 6
Accessories .......................................................................................................... 6
Disposal ................................................................................................................ 6
GENERAL SAFETY INSTRUCTIONS
The DMG-5 must be used only by expert personnel certified according to
country-specific standards.
Before first use, read this operating manual thoroughly to prevent improper use.
The DMG-5 must be used only with the refrigerants indicated below. Other gases or fluids
must never be used with the DMG-5.
Do not use or store the unit in environments that are not within the working temperature range.
Protect the DMG-5 from rain or other external liquids.
Never exceed the manifold's maximum pressure of 870 psi. This could irreparably
damage the sensors. There is also a danger of the sight glass breaking, which may
injure the user.
During all work, make sure to wear personal protection gear that includes safety gloves and
safety glasses.
Avoid dropping the DMG-5 from large heights.
Do not overtighten the valves. This permanently reduces the valves' seal.
Connect only original JB Industries accessories (DMG-Vac, DMG-DATA)
to the DMG-5.
English
3