INTEGRA Biosciences FIREBOY eco Manual De Instrucciones página 15

FIREBOY eco – Operating instructions V00
3.3 Connecting the foot or benchtop switch
Insert the plug of the foot or benchtop switch in the socket on the reverse
side of the device (see
The switch is now connected.
3.4 Removing and adding the burner head
To remove the burner head, pull it out vertically upward.
To install the burner head, place it on the device with the 3 contact pins
and push it down vertically until it clicks into position.
The burner head is now reinstalled.
C
AUTION
Never carry the device by the burner head.
www.integra-biosciences.com
"Rear view" on page
Start-up
6).
11