Troubleshooting - Silverline 263354 Manual De Instrucciones

GB

Troubleshooting

Problem Possible cause Solution
No power Check power supply
No function when On/Off
Switch (11) is operated Have the On/Off Switch replaced at an authorised Silverline service
Defective On/Off Switch
centre
Pressure hose only partially Stop Button (24) pressed in on Roller Frame
Press Release Lever (23)
filled before pump switches off Handle (2)
Put water into Suction Hose Nozzle (16) and see 'Cleaning the valve
Valves dry
Pump is running but paint is
unit' in Maintenance
not being pumped
Paint Control Switch (12) incorrectly set Set to 'working' position
Paint Filter (20) clogged Clean
Paint flow interrupted
while working
Make sure the Filter is at the bottom of the paint container; tilt the
Paint Filter not submerged
container if necessary
Other fault or solution not
Fault in pump unit or other part Requires servicing or repair by authorised Silverline service centre
working
8 8