Publicidad
Idiomas disponibles
Idiomas disponibles
EXTERNAL CONTROL DEVICE SETUP
• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or
an A/V control system) to control the product's functions externally.
Note: The type of control port on the TV can be different between model series.
• Please be advised that not all models support this type of connectivity.
• Cable is not provided.
USB to Serial converter with USB Cable
USB Type
(PC)
• LGTV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converter which is
not made nor provided by LG.
(PC)
• It can be purchased from computer stores that carry accessories for IT support professionals.
RS-232C with RS-232C Cable
DE9 (D-Sub 9 pin) Type
(PC)
(PC)
• You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for
the connection between the PC and the TV, which is specified in the manual.
• The connection interface may differ from your TV.
(PC)
(PC)
Set ID
(PC)
For Set ID number, see "Real Data Mapping".
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to OPTION and press OK.
3 Press the Navigation buttons to scroll to SET ID and press OK.
4 Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
(PC)
5 When you are finished, press EXIT.
RS-232C IN
(CONTROL & SERVICE)
1
3
2
RS-232C IN
(CONTROL)
1
3
RS-232C IN
(CONTROL & SERVICE)
2
1
3
2
1
3
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
(TV)
(TV)
(TV)
(TV)
(TV)
(TV)
(TV)
(TV)
17
Publicidad
