Uline LAGUNA H-8675 Manual Del Usuario página 2

3. Repeat step 2 for the top rounded-edge board.
(See Figure 2)
4. Place middle supports evenly spaced at the center
point of the top and front installed slats. From
underneath, attach slats to middle supports at the
pre-drilled holes using the square head screws.
(See Figure 3)
5. Install the next seat board adjacent to the front
rounded board using the 3/8" spacers to ensure an
even 3/8" gap between boards. Attach with screws
fastened through the pre-drilled holes. (See Figure 4)
6. Repeat step 4 for all remaining boards, using the
spacers to align and fasten them.
NOTE: H-6681 Mounting hardware sold
separately.
PAGE 2 OF 6
ASSEMBLY CONTINUED
1-800-295-5510
uline.com
Figure 2
Figure 3
Figure 4
0823 IH-8675