Jackery Explorer 300 Plus Manual Del Usuario página 8

GB
BASIC OPERATIONS
Output On/O
Main power on/off: Press the "Main Power Button" and the working indicator lights up and the LCD
display is illuminated. When this product does not have any operation for 2 minutes, the product will
enter the hibernation state and the display will turn off automatically. If you need to turn off the main
power, please press and hold the "Main Power Button" until the working indicator turns off. The default
standby time of this product is 2 hours. If the other power output switch is not turned on, or the product
does not have any charging input, the product will automatically shut down after 2 hours. The
automatic shutdown time can be set on the Jackery App.
AC Output On/Off: Ensure that the main power supply is turned on. Press the AC Button, the AC
Output operation indicator lights up. Then you can connect the equipment that needs AC charging.
Press the AC Button again to turn off the AC Output.
USB/Car Port Output On/Off: Ensure that the main power supply is turned on. Press the DC Button, the
DC Output operation indicator lights up. Then USB/Car Port Output Ports can be connected to
external load devices. Press the DC Button again to turn off the USB/ Car Port Output.
LCD Screen On/O
To turn on, press the Main Power Button or when there's a charging input, the screen display will
light up automatically. To turn off, press the Main Power Button again and the screen display will
turn off. Or, if there is no operation in 2 minutes, the product will enter a sleep state and the screen
display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps: After the
display screen lights up, double-click the Main Power Button and the mode of Always-On Display will
be on.
To turn off Always-On Display, follow these steps: Press the Main Power Button and the screen will
be turned off in 2 minutes.
Tip: During Always-On mode, the screen automatically turns off after 2 hours without charging or
discharging.
AC Input Reset Button: When the Reset Button pops up, you need to remove AC charge cable and
press the Reset Button to reset.
LED Light On/O
There are two modes of LED Light: Light mode, and SOS mode.
The operations are as follows: Press the LED Light Button, the LED will be turned on. The light will always
turn on in Low Light mode and the output power on the screen is 1W. Press again to enter the SOS mode
and the output power on the screen is 1W. Then, press again to turn o the LED Light. In any of these
modes, the light can be turned o by a long press.
APP CONNECTION
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Google Play. Please refer to the User Manual for
Jackery App for detailed connection instructions.
CHARGING YOUR JACKERY EXPLORER 300 PLUS
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give
priority to solar charging and both methods will be used to charge the battery at the maximum
permissible power.
05