Descargar Imprimir esta página

Melchioni Family VERMENTINO 18 C Manual De Instrucciones página 35

Ocultar thumbs Ver también para VERMENTINO 18 C:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Shelves
To remove the shelves from the track, pull each shelf out to the shelf post, as shown
in figure A. Lift it up again, then slowly pull the shelf out, as shown in figure B.
Power failure
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need to take
the proper steps to protect your contents.
Moving your chiller
Remove all items (bottles)
Tape down securely all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during
transportation. If you absolutely need to transport the chiller horizontally,
transport the chiller on its back (door on top). Also protect outside of appliance
with a blanket, or similar item
8. TIPS
It is intended to be used exclusively for the storage of wine.
This refrigerating appliance is not suitable for the freezing foodstuffs.
The wine cooler is recommended to be designed at 12°C.
The shelves placed in factory mode is the most efficient use of energy
for the refrigerating appliances.
Fig. A
34
Fig. B

Publicidad

loading

Este manual también es adecuado para:

Vermentino 18 c dualVermentino 27 c dualVermentino 36 c dual