Publicidad
Idiomas disponibles
Idiomas disponibles
MAX
OPERATING INSTRUCTIONS
Prior to Usage: Remove
the packaging and clean
the towel steamer (see
Care and Maintenance
section). Note: A slight
scent may be detected
during its initial
application. The emission
of odor is a normal
phenomenon and will
dissipate quickly.
Step 1: Put the main
body on a flat, stable
surface.
Step 2: Fill the water
tank in the main body,
making sure the water
does not exceed the
maximum level indicator
located on the ledge
towards the front of the
water tank. Note: For
best performance and to
increase the life of this
steamer, only use Distilled
or filtered water.
Step 3: Install the
condensation tray and
the steam basket onto
the machine with the
condensation tray below
the steam basket.
Step 4: Pre-wet/dampen
cloths before placing in
steamer and place into
the steam basket. Note:
Cloths must be moisten or
damp in order to steam
properly.
light
Step 5: Cover the steam
basket with the steam
lid.
Step 6: Plug in the
steamer and the White
LED notification light
will turn on indicating
that the steamer is
ON. Rotate timer knob
clockwise to start the
timer and the steaming
process. A ticking
sound will start and the
White LED notification
light will turn Green.
Step 7: An audible
"ding" will sound when
the steaming time is
complete.
⚠TO REMOVE STEAM
LID, LIFT BY HANDLE
ONLY.
ding
Step 8: To remove
items from steam
basket, use the
supplied tongs.
Steamed items
will be hot!
Step 9: Allow the
steam basket and
condensation tray
to cool down. Next,
remove them and
discard the excess
condensate water.
Publicidad
