• Do not use any electrical appliances in potentially explosive environments, e.g. in the presence
of flammable liquids, gases or dust. Electrical appliances produce sparks that can ignite dust or
exhaust fumes.
INTENDED USE
This under-cabinet light is only to be installed indoors and outside wet rooms. Use the product
only for the purpose it is intended for. The manufacturer accepts no liability for damage caused
by improper use. Any modification to the product may negatively impact safety, cause hazards
and invalidate the warranty.
Only suitable for domestic use; not for commercial use.
UNPACKING INSTRUCTIONS
Open the box and remove the product. After unpacking, please check the product for damage
and to ensure it is complete. Subsequent claims cannot be accepted.
USING THE APPLIANCE FOR THE FIRST TIME
1.
Install the fastening clips at the desired location using the mounting material provided. Please
note the two construction variants A or B (diagram 3+4).
2.
Connect the under-cabinet light to the mounted fastening clips.
3.
Plug the power cord into the socket provided on the side of the cabinet light.
4.
Insert the power plug into the power outlet.
5.
The under-cabinet light can now be switched on and off by pressing the toggle switch.
Note: This under-cabinet light can be expanded as often as you like (max. 12 lights). Use the
enclosed adapter for the expansion and switch it between two lights. Only one socket is required,
and you can use several lights independently of each other. An extension can only work with
under-cabinet lights of the same model.
MAINTENANCE AND CARE INSTRUCTIONS
Turn the lamp off and allow it to cool completely. Wipe the lamp with a damp cloth.
Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Only have parts replaced with original spare parts by a specialist in accordance with the
manufacturer's specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. To ensure electrical safety, the appliance must not be subjected
to liquids or be immersed in them. Regular maintenance helps to ensure the safety of the product
and increases its service life.
Note: The LEDS cannot be replaced. The whole product must be replaced when the LEDs reach
the end of their service life.
TECHNICAL DATA
This product incorporates a light source with Energy Efficiency Class F.
Item no.
Model
Rated voltage
Protection class
Power input lamp max.
107880
MZUL538
220-240V ~50/60Hz
IP20
9W
9
107881
MZUL538s
220-240V ~50/60Hz
IP20
9W
www.DEUBAXXL.de