WIMIUS P62 Manual Del Usuario página 9

Idiomas disponibles

support01@wimius.com

Connecting with Smartphones and iPad

Note:

This projector support only Wireless Connection, wired connection is not possible.

PS: The fluency of screen mirroring with wireless connection will be affected by the network environment. A

bandwidth of 100Mbit or more is recommended when using screen mirroring. Make sure your mobile device is

closed to the projector when using wireless connection. A distance within 1 meter is recommended.

How to Use WiFi Settings

Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote

control to enter the settings interface and select "WiFi Setting".

For IOS System

Setting with Home Wi-Fi

Attention:

Your device and the projector should be in the same Home WiFi.

1.Turn on the WiFi Setting of projector.

2.Choose your Home WiFi to connect and enter the right password, then click "Done" to Connect, please wait 3-5

seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.

3.Turn on the WiFi setting of your iOS device, then connect it the same Home WiFi as the projector.

4.Then click "iOS Cast"

as the Input Source of your projector.

5.Swipe up the screen of your iOS mobile device and tap "Airplay" to search for the projector, then select "WiMiUS-

P62Projector" from the searching results to connect.

6.Succeed.

For Android System

To activate this function, your android device must support Multi-Screen/Wireless Display. Name of "Multi-Screen"

may vary depending on various brands of Android devices.

Method 1: Setting with mobile internet

1.Turn on the projector, select "Miracast"

2.Turn on the "Multi-Screen/Wireless Display" of your Android device.

3.Select "WiMiUS-P62Projector" from the searching results to connect.

4.Succeed.

support01@wimius.com

as the Input Source.