ARDES ARSBAT02 Folleto De Instrucciones página 11

Contact with food
Only these parts are intended for contact with food, under the conditions indicated:
Parts intended for
contact with food
Hooks (E)
Whippers (F)
Bowl (G)
Lid (H)
- These parts can only be used with this appliance. Do not use the parts separately for other applications.
- Before using the appliance for the first time wash the parts intended for contact with food as indicated
in the Maintenance section.
USING THE DEVICE
Hand mixer without base
Switch off the appliance and disconnect it from the power outlet before assembling or disassembling
the accessories.
- Assemble the accessories (E) (F) which are best suited for the type of mixing to be performed. To
assemble the accessories, insert the stem into the appropriate hole until you hear it click into place.
ATTENTION: The hooks (E) and the whippers (F) are different each other and can be
assembled only to one of the holes.
- Make sure that the 5-speed switch (B) is set to "0" and insert the plug into the socket.
- Immerse the whippers or the hooks and begin mixing by setting the lowest speed and gradually
increasing the speed as desired.
ATTENTION: Observe the times and speed settings given in the "ACCESSORIES,
SETTINGS, MAXIMUM DOSAGE, TIMES" paragraph.
- After use, set the 5-speed switch (B) to "0". DIsconnect the plug from the socket.
- To disassemble the accessories (E) (F), press the release button (A).
- Clean the parts immediately (see MAINTENANCE) to avoid cleaning becoming difficult.
- Let the appliance cool before putting it away.
Hand mixer with base and rotating bowl
Switch off the appliance and disconnect it from the power outlet before assembling or disassembling
the accessories.
- Assemble the accessories (E) (F) which are best suited for the type of mixing to be performed. To
assemble the accessories, insert the stem into the appropriate hole until you hear it click into place.
ATTENTION: The hooks (E) and the whippers (F) are different each other and can be
assembled only to one of the holes.
- Press the button (M) downwards and raise the arm (L);
- Put the ingredients in the bowl (G); place the bowl (G) on the base (I);
- Position the motor body (D) on the arm (L). Press the button (C) to fix the motor body.
- Insert the cover (H) on the arm (L);
- Press the button (M) downwards and lower the arm (L).
- Make sure that the 5-speed switch (B) is set to "0" and insert the plug into the socket.
- Begin mixing by setting the lowest speed and gradually increasing the speed as desired.
ATTENTION: Observe the times and speed settings given in the "ACCESSORIES,
SETTINGS, MAXIMUM DOSAGE, TIMES" paragraph.
- After use, set the 5-speed switch (B) to "0". DIsconnect the plug from the socket.
- Press the button (M) downwards and raise the arm (L);
- Empty the bowl (G);
- Remove the lid (H);
(EN) INSTRUCTIONS FOR USE
Types of food
All
11 / 32
Maximum
temperature
40°C
Maximum time of
contact
30 min