Operating Instructions
• ON/OFF switch: To turn on, slide the switch to the ON position. The sound and
light function will switch on by default. To turn off, slide the switch to the OFF
position. The device can still be charged in this position but the other functions
will not work.
• Light button: The default light and sound will turn on when the device is
switched on. To turn off the light press the light button once. To change the
brightness of the light, press and hold the light button for 3 seconds. Release
when the light is at the desired level of brightness.
• Mood lighting: The nightlight has 8 different colour modes. To change the
colour of the nightlight, press the light button repeatedly to toggle through the
colours. To use the nightlight only, long press the sound button to turn off the
sound function.
• Sound source selection button: While the device is turned on, short press the
sound button to move through the sounds.
• Volume adjustment button: To increase or decrease the sound use the "+" or
"-" buttons. Note: There are 10 volume levels
• Timer button: The timer button allows you to select how long you want the
device to operate for. The device will automatically shut off after the selected
time. It will go into Cry Sensor mode if you have selected this additional
function. Timing (15 min, 30 min, 60 min, 0 min).
Timer: Short press the timer button repeatedly to select the desired time and
a corresponding indicator light will display. The timer function will then begin.
When the time is up, the device will shut off.