Fimar FF/30 Uso Y Mantenimiento página 20

– The activity may affect the environment and, for this reason, take air emissions, liquid
discharges and ground contamination, the use of raw materials, natural resources and
waste disposal into account.
– During transport and storage, environmental temperature must be between -25°C and
55°C with a maximum of 70°C as long as exposure is no longer than 24 hours.
– Packaging components must be disposed according to current laws in the country of
use.
– When decommissioning and scrapping the appliance, divide all parts according to their
features and dispose accordingly. Specifically, electrical and electronic components
marked by a specific symbol must be taken to authorised recycling centres or returned
to the dealer when purchasing a new appliance.
Electrical and Electronic equipment contain hazardous substances, potentially
harmful to health and the environment. Please dispose of them correctly.
GB
SAFETY AND INFORMATION SIGNS
Safety signals are affixed to the appliance areas with RESIDUAL RISKS to inform the
user of their existence.
The illustrations depict the safety and information signs affixed on the equipment.
UNPACKING, HANDLING AND INSTALLATION INSTRUCTIONS
– The appliance is delivered packaged in a specific container and, if necessary, suitably
stabilised with shockproof material to ensure its integrity.
Packaging may be on a pallet according to appliance features, destination and transport
means to facilitate handling.
All information required for handling (loading and unloading) in safe conditions is indi-
cated directly on the packaging.
– The package must be handled according to its specifications (weight, dimensions, etc.).
For limited dimensions and weights, the package may be handled manually. Otherwise,
use a lifting device with suitable capacity.
Upon receiving the appliance, make sure all components are integral. In the event of
damages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards in
effect in the country of use.
Translation of the original instructions
– Electrical shock hazard: this indicates the need to turn power off
(or unplug the power cord) before working on electrical connec-
tions.
- 6 -
GENERAL AND SAFETY
INFORMATION
English language