Livoo DV153 Manual De Instrucciones página 16

or remote control. To return to the home screen, click on the back button of the device (figure 1, button 6)
or the remote control (figure 2, button 7). To return to the previous page only, press the back button
(Figure 2, button 9) on the remote control.
2. PAGE SETTING
In this menu you can set different parameters:
2.1. IMAGE
• Image Mode (Fig. 6): In this mode, you can choose between 3 preset display mode (standard, mild,
dynamic) or customize your own display mode (User) by adjusting contrast, brightness, color, sharpness
and hue.
• Color temperature: here you can choose 3 preset color modes (cold, standard, hot).
• Aspect ratio: here you can choose two projection modes (4:3 or 16:9).
• Reduced bottom noise
• Projection Direction: In this mode, you can choose between 4 different types of projection (mirror,
mirror, inverted, normal).
• Adjust the projected screen size: in this mode you can set the size between 0 and 100%
2.2. SON
• Audio mode: in this mode, you can choose between 4 preset modes (standard, music, movie, sports) or
customize your own audio mode (user) by adjusting the bass and treble.
• Scale: adjust the scale of the device here (from -50 to +50)
• Auto Volume: here you can choose whether or not to leave (respectively on or off) the device
automatically set the volume.
2.3. TIME
•Minut. Extinc: you can select from this menu the period after which the device will automatically go to
sleep or disable this function (off)
2.4. OPTION
• OSD languages: you can choose the language of the device from the 23 available languages.
• Zeroing: In this menu you can clear all data on the device and restore the factory configuration.
• Blending: You can adjust the transparency of the bottom of the menu.
• OSD time: you can select the duration of the menu display (5, 10, 15 seconds or no duration)
• Software update (via USB): via this menu you can update the device via a USB port.
3. Input Source
3.1. HDMI connection
You can connect your projector via the HDMI port (Fig. 3) and an HDMI cable (not included). Once
connected, on the home page, select HDMI Input Source to duplicate the screen via the HDMI cable.
To exit the "HDMI" projection mode, press the "back" remote control button (Fig. 2).
Note: You can also press the 7 button on the remote control to select the input source.
3.2. AV Connection
Connect an AV cable to the AV port on the back of your projector (Fig. 3) via the supplied AV cable. Once
logged in, on the home page, select 'AV' to duplicate your screen via the AV cable. To exit the "AV"
projection mode, press the "back" remote control button (Fig. 2).
Note: You can also press the 7 button on the remote control to select the input source.
3.3 USB connection
Connect a USB stick or device via the USB port (Fig. 1). On the home page, you can select between 3
different media types: «Film», «Music» or «Photo». You can then browse through the files on your USB stick
www.livoo.fr