Airfree Iris Manual De Instrucciones página 11

Plug the power cord into the nearest outlet.
Make sure the surface is dry (never place your Airfree
water). Make sure the blue led on the side is on. After 10 minutes the top lid should be
warm.
Place your Airfree ® on flat surfaces and not under furniture, shelves or behind curtains as it will
reduce air flow and Airfree
Place each Airfree ® Iris in rooms up to 60m². For larger rooms use proportionally additional
Airfree ® units. The use of just one Airfree
Airfree ® efficiency.
Airfree ® must be continuously on in the same room, 24 hours a day.
Airfree ® can only be used in rooms with minimum air volume of 330 cu. ft. (10 m3), free of
obstacles.
Airfree ® can be installed in rooms equipped with air conditioning and heating systems.
However it is recommended not to place Airfree
in Airfree ® air flow.
Airfree ® can be placed in corridors but its air sterilisation effects will not affect adjacent
rooms.
Airfree ® shall not be placed near doors or under windows to avoid sterilised air to exit the room.
To change top light colours press the sensor on the top of Airfree
switch to the next colour. For the random mode please switch to pink and let it be. Maintaining
finger pressed on the sensor will increase or diminish brighteness.
Installing and Connecting
® 's efficiency in the reduction of microorganisms.
® in rooms larger than recommended will reduce
11
® on a wet floor or immerse it into
® nearby them to avoid potential interference
® 's logo. Each touch will
E
n
g
l
i
s
h