Maintenance And Cleaning; Technical Data - Clatronic AT 3605 Instrucciones De Servicio

Countdown timer (counting backwards)
Press the ADJ key to start the countdown or to stop it. If the countdown has been activated,
the letters "H" and "M" (hours and minutes) will flash. When the countdown finishes an alarm
will go off. Use the ADJ button to stop the signal.
CAUTION:
• Do not immerse the device in water. This could damage the electronic circuit.
• Do not use chemicals like benzene, solvents or petroleum ether to clean the tester.
• Wipe the device only with a slightly moist cloth.
• Make sure no liquid enters the breathalyzer sensor.
• Do not store the device in rooms with contaminated air.
• Do not modify the tester as this could result in malfunction.
Sensor: ........................................................................................................Alcohol oxide tester
GB
Measuring range: ................................................................................... 0.0‰ – 1.9‰ per mille
Accuracy: .......................................................................................................................+/- 0.1%
Power supply: ..................................................................... 2x 1.5 V AAA • UM-4 • R03 battery
Operation time warm-up: .................................................10 seconds, result after: <5 seconds
Automatic switch-off: .................................................................................. approx. 40 seconds
Net weight: ........................................................................................................ approx. 0.36 kg
The right to make technical and design modifications in the course of continuous product
development remains reserved.
This device has been tested according to all relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives, and has been constructed in accordance
with the latest safety regulations.
38

Maintenance and Cleaning

Technical Data