Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Turning the TV On and Off
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
All manuals and user guides at all-guides.com
Press the POWER
button on the remote control.
You can also use the
1. Press the POWER
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
ENTER button to confirm your choice.
3. The message "Check antenna input." is displayed with "OK" selected. Press the
ENTER button.
4. Press the
or
the ENTER button.
5. Press the ENTER button to select "Start". The TV will begin memorizing
all of the available channels.
To stop the search before it has finished, press the ENTER button with "Stop"
selected.
6. Press the ENTER button. Press the
"Hour", "Minute" or "am/pm". Set the "Hour", "Minute" or "am/pm" by pressing the
or
buttons. Press the ENTER button.
(Refer to "Setting the Clock"on page 33.)
You can set the Hour and Minute directly by pressing the number buttons on the
remote control.
7. The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER button.
English-13
button on the front of the panel.
button on the remote control.
buttons to select "Air", "STD", "HRC", or "IRC", then press
or
buttons to move to the
or
buttons. Press the
Publicidad
