ENGLISH
casters.
6. Repeat these steps in the other side of the radiator to fix the rear casters.
4. OPERATION
- Always place the device on a flat and stable surface.
- Set the power switch and thermostat to 0
- Plug the device to an earthed wall socket.
- Turn the thermostat knob clockwise to the max. setting.
- Press the power level switches to select the desired power level:
- Switch I: Eco heating mode.
- Switch II: Medium heating mode.
- Both switches at once: Maximum power heating.
- Turn of the switch and set the thermostat to 0. Unplug the device from the power
supply to switch it off completely.
Thermostat
To select the desired temperature for the room, turn the thermostat knob until the
light indicator turns off. If the room temperature falls below the set temperature, the
device will automatically turn back on.
Turn the knob clockwise to increase temperature or anticlockwise to decrease it and
select the desired temperature.
Protection against over heating
The radiator features a safety system that turnsthe device automatically off when it
reached excessive temperatures.
5. CLEANING AND MAINTENANCE
- Turn off and unplug the appliance and allow itto cool down before cleaning it.
- Do not use abrasive cleaners ro scouring pads to clean the product.
- Use a soft, dampened and clean cloth to clean the product's exterior housing. Be
careful not to touch the heating element.
- If the radiator is not going ot be used for a long period of time, unplug itand store it
18
RADIADOR DE ACEITE EVVO C9 BLANCO