Publicidad
Settings
SETTINGS
BALANCE
AUDIO
>
VOLTAGE GAUGE
11V
BT DEVICE PAIRING
>
Source Unit Settings
To access
the
source
unit's
settings,
press
and
hold
the MENU button until the options appear. Rotate the
encoder to scroll
through the
list of settings and then
press the encoder button to select the setting you wish to
change. (BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT
PAI
RI NG>BEEP> TUNER REGION>SOFTWARE>
THEME>REMOTE
SETUP>CLOCK/DATE>FACTORY DEFAULT)
BALANCE
Press the encoder button to access BALANCE adjustment settings.
Rotate the encoder button to set output BALANCE.
FADER
Press the encoder button to access FADER adjustment settings.
Rotate the encoder button to set output FADER.
AUDIO
To access the AUDIO settings, press the AUDIO option from the
MENU screen. Rotate the encoder to scroll
through
the list of
settings and then press the encoder button to select the setting
you wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR
RCA>AUX
IN
PUT>SOU RCE GAi N>I NTERNAL AMPLIFIER)
7BANDEQ
Press the encoder button to access the 7 BAND EQ settings. Use
the rotary encoder to scroll through the EQ settings. (FLAT>
ROCK> CLASSIC> ACOUSTIC> DANCE> ELECTRONIC>
HIP-HOP
> CUSTOM) When setting up
the
CUSTOM EQ, press the encoder
button to set the first frequency. Once active, rotate the encoder
to adjust the frequency settings. Press encoder button again
to access the next frequency. Repeat until all EQ settings are
complete. Press the MENU button to exit and go back up one
level.
CROSSOVER
Press to access the CROSSOVER settings. Use the rotary encoder
to select the crossover zone options (FRONT>REAR>SUB).
Press the encoder to adjust the frequency of the crossover
(60Hz>80Hz>120Hz>APF). Press MENU to exit and go back up one
level.
PUNCHEQ
Press to access the PUNCH EQ settings. Use the rotary encoder to
adjust the gain output (0-12). Press MENU to exit and go back up
one level.
Punch EQ is an on board equalizer with
up
to+ 18dB@ 45Hz and/
or up to +12dB boost at 12.SkHz
6
AUX INPUT
RENAME - To rename AUX, press the encoder button to set the
first
letter
of the new name. Once active, rotate encoder to select
letters. Press
the encoder button again to set the
next letter.
Repeat until AUX has been renamed. Press MENU to exit and go
back
up one
level.
ENABLE - Press
the
encoder button to access options. Rotate
the encoder button to select if unit is
discoverable.
(ENABLE>
DISABLE)
SOURCE GAIN
To
adjust the
level
of device input gain, scroll through the
inputs
(FM TUNER>AM TUNER>USB>AUX1>AUX2>BLUETOOTH>PANDO
RA>SiriusXM>GLOBAL
INPUT)
to the
device
you want to adjust,
press the encoder
button
to access the gain settings. Rotate the
encoder button to set the level of gain (-3dB > -2dB > -ldB > 0dB >
+ldB > +2dB > +3dB).
Selecting the GLOBAL INPUT option
lets
you adjust all source
attenuation at once (0dB>-3dB>-6dB>-9dB>-12dB>-15dB>-18dB).
INTERNAL AMPLIFIER
Press to access the
INTERNAL
AMPLIFIER options. Use the rotary
encoder to select options (ON>OFF). When using an amplifier
to power your speakers, select OFF. If you are powering your
speakers directly from the source
unit,
select the INTERNAL
AMPLIFIER to ON.
VOLTAGE GAUGE
To display the vehicle voltage, press the encoder button on the
VOLTAGE GAUGE option.
BT DEVICE PAIRING
Press the encoder button to access options (DISCOVERABLE>
DEVICE).
DISCOVERABLE
Rotate the encoder button to select if unit is discoverable for
pairing. (ENABLE> DISABLE) Once enabled, the source unit is now
discoverable and ready for pairing to your mobile device. Open
the Bluetooth settings on your
mobile
device to find the source
unit
labeled
"Rockford PMX" and select.
DEVICE
Selecting DEVICE by pressing
the
encoder button will allow you
to rename the source
unit
with up to 16 characters. This gives you
the ability to
have
a unique
name
for easy identification during
device pairing. Press the encoder button to select the letter to
be
changed and rotate the knob to change the value. Repeat process
until
desired
name
is reached.
BEEP
Press the encoder button to access
the BEEP
options. Rotate the
encoder button to turn system beep ON/ OFF.
TUNER REGION
To
adjust, press the encoder button to access. Rotate the encoder
button to select
the
TUNER REGION of your preference. (EUROPE
>USA> RUSSIA> LATIN> ASIA>
JAPAN>
MIDEAST> AUSTRALIA)
SOFTWARE
VERSION - Press the encoder button to display the current
firmware version of the
unit.
UPDATE - Press the encoder button
to
update the firmware.
Follow the instructions on the screen when
updating.
Publicidad
