Resumen de contenidos para Living Essentials Daisy BMSWWH0116
Página 1
Assembly Instruction Instrucción De Montaje Daisy Jewelry Cabinet - White Daisy Joyero con Espejo - Blanco Model # BMSWWH0116 THANK YOU We appreciate the trust and confidence you have placed in LivingEssentials through the purchase of this jewelry cabinet. Thank you for choosing LivingEssentials !
Página 2
NO EXPEDITED Service available (for example; next day air, 2 day air service, 3 day air), there will NOT be any exceptions. LIVING ESSENTIALS is not responsible for any consequential damages, which may arise out of the purchase, or use of any of our product/s.
Página 3
Daisy Jewelry Cabinet - White Model # BMSWWH0116 Daisy Joyero con Espejo - Blanco INSTALLATION INSTRUCTIONS INSTRUCCIONES DE INSTALACIÓN BEFORE BEGINNING ANTES DE EMPEZAR • Lea todas las instrucciones • Please read all instructions carefully. cuidadosamente. • Familiarize yourself with all parts •...
Página 4
SAFETY PRECAUTIONS | PRECAUCIONES DE SEGURIDAD WARNING ADVERTENCIA • This unit contains small parts which could be a choking • Este producto contiene piezas pequeñas que pueden hazard for small children. Children should be under adult causar peligro de asfixia a niños pequeños. Los niños supervision at all times or serious injury could occur.
Página 6
HELPFUL HINTS | CONSEJOS PRÁCTICOS Use these helpful hints to ensure proper assembly. Use estos consejos prácticos para asegurarse de Review and refer back to these hints when una instalación apropiada. Lea y revise de nuevo prompted to do so in an assembly step. estos consejos cuando se le indique en los pasos We recommend you protect your work surface de instalación.
Página 7
INSTALLATION | INSTALACIÓN Insert the screw(G) through the wood plate hole(D&E), the hole MUST point toward hole STEP 1 in edge of panel. Inserte el tornillo (G) a través del orificio de la placa de madera (D&E), el orificio DEBE PASO 1 apuntar hacia el orificio en el borde del panel.
Página 8
INSTALLATION | INSTALACIÓN Assemble the two legs (B&C) with across bar (D&E) using bolt (F) and Allen Key (L). STEP 2 Place the bung(H) in each side hole in order to adjust the height. Ensamble las dos patas (B&C) con la barra transversal (D&E) con el perno (F) y la llave PASO 2 Allen (L).
Página 9
INSTALLATION | INSTALACIÓN STEP 3 Attach the jewelry cabinet (A) to the legs (B&C) using bolt (K) and washer (J). PASO 3 Fije el gabinete para joyas (A) a las patas (B&C) con el perno (K) y la arandela (J).
Página 10
INSTALLATION | INSTALACIÓN Open the jewelry cabinet, there are LED lights on the top inside, they are battery-operated, 3 batteries is required (not included). The lights are controlled by the magnetic sensor, when the door opens the lights turn on, and when the door closes the STEP 4 lights turn off.