ARDES AR4F06T Folleto De Instrucciones página 12

During use, rest the appliance on a flat surface.
Do not use this heating appliance with programmers, timers, separate
remote control systems (different to the ones provided with the appliance)
or any other device that automatically turns on the appliance, as there is a
risk of fire in the event the appliance is covered or positioned incorrectly.
Do not use the heater in presence of flammable substances (petrol,paints,
etc.).
Do not place the cord near sources of heat.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OR
OTHER COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE
AIR INLETS TO AVOID OVERHEATING.
1 - Handle
2 - Function switch
3 - Adjustable thermostat
4 - Operating indicator light
5 - Timer
6 - Control switch for the oscillating function
Technical data indicated on the appliance.
The appliance can emit both cold air and hot air depending upon the
function selected by means of the function switch. Make sure that the
function switch (2) is in the OFF position before connecting
or disconnecting the appliance.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch (2) in the desired position and turn the temperature
switch (3) clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light (4) indicates that the appliance is operating and will
switch off when the adjustable thermostat is activated.
12
Technical informations
Instructions for use
GB
GB