Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI® HDBaseT + 3.5mm, USB-A, and RS232 over Cat Audio De-Embedding
Extender Box Receiver - 4K 60Hz
Features
HDMI 1.4 with 4K@60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliant
•
Transmits 4K@60Hz (YUV 4:2:0) signal up to 40m/131ft and 1080P@60Hz signal up to
•
70m/230ft via a Cat 6a/7 cable
Transmits 4K@60Hz (YUV 4:2:0) signal up to 35m/115ft and 1080P@60Hz signal up to
•
60m/197ft via a Cat 5e/6 cable
Supports analog audio pass-through from transmitter to receiver
•
Supports analog audio de-embedding for HDMI output
•
High-speed USB 2.0 pass-through over HDBT
•
Provides two high-current USB device ports to connect high-power USB devices
•
Supports bi-directional RS232 serial communication to control an RS232-enabled device when
•
paired with a normal HDBT transmitter
Supports bi-directional RS232 serial communication to control a wall plate transmitter when
•
paired with a wall-plate transmitter
Supports firmware upgrades through RS232 port
•
Built-in PSE to power remote HDBT Wall plate transmitter with PD module
•
Mounting Bracket Installation
Note: Before installation, please ensure the unit is disconnected from the power source.
1.
Choose a suitable location for mounting bracket installation.
2.
Position and install the mounting brackets of the receiver with the two mounting screws
provided.
3.
Mount and secure the receiver to a surface or a suitable location respectively with
mounting screws.
3
Package Contents
1 x Receiver
•
1 x DC 12V Power Adapter with US,
•
UK, EU, AU Pins
1 x Phoenix Male Connector
•
(3.5mm, 3 Pins)
2 x Mounting Brackets (with screws)
•
1 x Manual
•
(us)
(us)
Publicidad
