Descargar Imprimir esta página

Grandstream GWN7810 Serie Guía De Instalación Rápida página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
OVERVIEW
EN
The GWN7810 series are Layer 3 managed network switches that allow medium-to-large enterprises
to build scalable, secure, high performance and smart business networks that are fully manageable. It
supports advanced VLAN for flexible and sophisticated traffic segmentation, advanced QoS for prioriti-
zation of network traffic, IGMP/MLD Snooping for network performance optimization, and comprehen-
sive security capabilities against potential attacks. The PoE models provide smart dynamic PoE output
to power IP phones, IP cameras, Wi-Fi access points and other PoE endpoints. GWN7810 series can
be managed in a number of ways, including the local web user interface of the GWN7810 series switch
and CLI, the command-line interface. The series is also supported by GWN.Cloud and GWN Manager,
Grandstream's cloud and on-premise network management platform. The GWN7810 series are the
best value enterprise-grade managed network switches for medium-to-large businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for operation and -10 °C to
60 °C for storage.
• Do not expose the GWN7810 to environments outside of the following humidity range: 10-90% RH
(non-condensing) for operation and 5-95% RH (non-condensing) for storage.
• Do not power cycle your GWN7810 during system boot up or firmware upgrade. You may corrupt
firmware images and cause the unit to malfunction.
PACKAGE CONTENTS
GWN7810 Series Switch
1x 1.2m (10A)
8x Screws (KM 3*6)
1x Power Cord Anti-Trip
PORTS & LED INDICATORS
GWN7811/GWN7811P
1
5
3
6
4
2
GWN7812P
1
5
3
6
2
4
GWN7813/GWN7813P
1
2
15
14
GWN7813
11
1x 25cm Ground
4x Rubber
Cable
Footpads
Installation Guide
AC Cable
Extended Rack Mounting Kits
Rack Mounting Kits
2x(GWN7811(P))
2x(GWN7812P/GWN7813/
GWN7813P)
9
10
8
7
9
8
11
7
5
3
6
12
13
7
9
15
8
10
GWN7813P
GWN7813P Side Panel
~ 1 ~
No.
Port & LED
1
GWN7811(P): Port 1-8
GWN7812P: Port 1-16
GWN7813(P): Port 1-24
2
GWN7811(P): 1-8
GWN7812P: 1-16
GWN7813(P): 1-24
3
GWN7811(P): Port 9-10
GWN7812P: Port 17-20
GWN7813(P): Port 25-28
4
GWN7811(P): 9-10
GWN7812P: 17-20
GWN7813(P): 25-28
5
CONSOLE
6
RST
7
SYS
8
9
100-240VAC 50-60Hz
10
11
Fan
1x Quick
12
PWR
13
RPS
14
15
Note: External RPS (Reduntant Power Supply) is sold separately.
LED Indicator
LED Indicator
System
Indicator
10
Port Indicator
PWR/RPS
Indicator
Description
Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7811P-GWN7812P-GWN7813P Ethernet ports support PoE and PoE+.
GWN7813P port 1-8 support PoE++.
Ethernet ports' LED indicators
GWN7811(P): 2x 10Gbps SFP+ ports
GWN7812P: 4x 10Gbps SFP+ ports
GWN7813(P): 4x 10Gbps SFP+ ports
SFP+ ports' LED indicators
1x Console port, used for connecting managing PC
Factory Reset pinhole. Press for 5 seconds to reset factory default settings
System LED indicator
Power cord anti-trip hole
Power socket
Grounding terminal
GWN7812P: 2x Fans | GWN7813P: 3x Fans
Internal power supply LED indicator
Secondary external power supply LED indicator
External power supply rubber plug
External RPS power outlet
Status
Description
Off
Power off
Solid green
Booting
Flashing green
Upgrade
Solid blue
Normal use
Flashing blue
Provisioning
Solid red
Upgrade failed
Flashing red
Factory reset
Off
For all ports, port off & For SFP+ ports, port failure
Solid green
Port connected and there is no activity
Flashing green
Port connected and data is transferring
Solid yellow
Ethernet port connected and PoE powered
Flashing yellow
Ethernet port connected, data is transferring and PoE
powered
Alternately flashing yellow and green
Ethernet port failure
Off
Unused or failure
Solid Green
In use
Solid Red
Overvoltage or undervoltage
~ 2 ~

Publicidad

loading

Este manual también es adecuado para:

Gwn7811Gwn7812Gwn7813Gwn7811pGwn7812pGwn7813p