Grandstream GWN7810 Serie Guía De Instalación Rápida página 5

Install on a 19" Standard Rack
Note: GWN7811(P) require the Extended Rack Mounting Kits.
1. Check the grounding and
stability of the rack.
2. Install the two L-shaped rack-
mounting in the accessories
on both sides of switch, and fix
them with the screws provided
(KM 3*6).
3. Place the switch in a proper position in
the rack and support it by the bracket.
4. Fix the L-shaped rack-mounting to the
guide grooves at both ends of the rack
with screws (prepared by yourself) to
ensure that the switch is stable and
horizontally installed on the rack.
GWN7812P
Note: To avoid high temperatures
and keep the device cool, sufficient Air inlet
space should be left around the
switch for heat dissipation. The air
inlet of the switch cannot face or
be close to the air outlet of other
devices.
GWN7812
Air inlet
ACCESS & CONFIGURE
Note: If no DHCP server is available, the GWN7810 default IP address is 192.168.0.254.
Method 1: Login using the Web UI
1. A PC uses a network cable to correctly connect any RJ45 port of the switch.
2. Set the Ethernet (or local connection) IP address of the PC to 192.168.0.x ("x" is any value between 1-253), and
the subnet mask to 255.255.255.0, so that it is in the same network segment with switch IP address. If DHCP is
used, this step could be skipped.
3. Type the switch's management IP address http://<gwn7810_IP> in the browser, and enter username and password
to login. (The default administrator username is "admin" and the default random password can be found at the
sticker on the GWN7810 switch).
Fans
Air outlet
Back side
Air outlet
Fans
Left side
Back side
~ 5 ~
Method 2: Login using the Console port
1. Use the console cable to connect the console port of switch and the serial port of PC.
2. Open the terminal emulation program of PC (e.g. SecureCRT), enter the default username and password to login.
(The default administrator username is "admin" and the default random password can be found at the sticker on
the GWN7810 switch).
Method 3: Login Remotely using SSH/Telnet
1. Turn on the Telnet of the switch.
2. Enter "cmd" in PC/Start.
3. Enter telnet <gwn7810_IP> in the cmd window.
Air
4. Enter the default username and password to login. (The default administrator username is "admin" and the default
inlet
random password can be found at the sticker on the GWN7810 switch).
Method 4: Configure using GWN.Cloud / GWN Manager
Type https://www.gwn.cloud (https://<gwn_manager_IP> for GWN Manager) in the browser, and enter the
account and password to login the cloud platform. If you don't have an account, please register first or ask the
administrator to assign one for you.
The GNU GPL license terms are incorporated into the device firmware and can be accessed
via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed
here: https://www.grandstream.com/legal/open-source-software To obtain a CD with GPL
source code information please submit a written request to: info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
~ 6 ~