Publicidad
Idiomas disponibles
Idiomas disponibles
025905 BDI-AF 16 (Schuko):025905 BDI-AF 16 (Sch
1. Always plug the adapter directly into a wall socket.
Directions for use
2. Plug extension cables, cable reels, trailing sockets,
etc. into the safety adapter. Plug in the electrical
appliance (in switched-off condition).
3. Switch on the adapter by pressing the RESET
button. A red indicator must appear in the window
above the RESET button.
4. Now carry out a function test by pressing the TEST
button. A distinct switching noise must be heard
and the red indicator must disappear.
5. The adapter must not be used if the switching noise
is not heard and the red indicator continues to
appear in the window.
6. If the test proves successful, press the RESET
button again. The adapter is now ready for use.
Note:
From time to time, carry out a function test, press
the Test button and perform the procedure
described above.
After a power cut, switch on the adapter again.
The safety adapter is not suitable for appliances
which may give rise to consequential damage if
disconnected from the power supply for a
prolonged period of time (e.g. refrigerators, free-
zers, etc.).
This safety adapter does not eliminate the need
for other essential protective measures.
Note: Self-adhesive labels in various languages
are supplied with the pack. These are to be affix-
ed to the adapter, i.e. »Test before use«, and over
the adapter label »Plug in the right way up« and
» Up
Down«.
7
Publicidad
