asalvo baby TOKYO Instrucciones página 10

Hold the handlebar with one hand and lower the seat of the chair with the other
hand.
Then step on the folding and unfolding bar at the back of the frame until it is fully
unfolded. Make sure it does not close again.
Lift the front of the frame (as shown in the picture). Align the hole in the tires with the
end of the frame tube and engage until a "click" is heard. This indicates that they are
correctly adjusted. To remove the front wheels, press the button located in the center
of the wheels and pull out.
CAUTION: Make sure all locks are in the correct position before using the chair.
A strap with a clamp is located on the back of the backrest. Squeeze the clamp and
slowly release the strap while adjusting the backrest to the desired position (see
picture).
CAUTION: Please adjust the backrest carefully when the baby is using the chair.
LOCK THE FRONT WHEELS:
On the front of the front wheels is a lever which is the anti-swivel lock. To lock the
wheels, press down on the levers on both wheels and they will be locked and will no
longer rotate.
To unlock the wheels, lift up the levers on both wheels and they will turn again.
To activate the rear wheel brake, press the levers down.
To deactivate the brake, simply lift the levers again.
10
TOKYO STROLLER INSTRUCTIONS