2. Place the Base on a flat, level, stable surface.
3. Insert the Container Bowl over the Metal Shaft and turn the Container Bowl clockwise until the Safety
Latches of the Container Bowl lock to the Base (preventing the Container Bowl from detaching).
4. Attach the Blades by holding the plastic shaft end (end opposite
of the Blades) and inserting the Blade shaft over the center
column of the Container Bowl until secure.
5. Attach the Cover after inserting the food into the Container
Bowl.
IMPORTANT NOTE: The Cover must be securely locked into
its position before the food processor will operate. When
properly locked, the arrow inscribed on the Cover handle
must align with the arrow inscribed on the Base (near the
On/Pulse Button).
To Use
NOTICE: Do not process raw meat, cheese, coffee beans, or whole squares of chocolate in this
product, as product damage could result.
1. Cut the food into small pieces, as needed.
NOTE: Hard vegetables, such as raw carrots, may require splitting and/or quartering in order to
allow smooth operation and movement of the Blades.
2. Place the food into the Container Bowl. Do not fill past the maximum capacity of 1½ cups.
3. Attach and gently secure the Cover onto the Container Bowl (reference the "To Assemble" section).
4. Plug the product into a standard AC110V/60Hz AC electrical outlet.
5. Press the On/Pulse Button to begin processing the food.
6. To stop processing, release the On/Pulse Button.
7. Wait until the Blades and Metal Shaft have completely stopped before removing the Cover or any
contents.
8. Unplug the product from the electrical outlet when it is not in use or is left unattended.
WARNING:
Overfilling the Container Bowl could cause spillage, resulting in serious burns and/or
property/product damage.
P-4