Tannoy SRM 10A Manual De Instrucciones página 36

70
SRM 10A/12A/15A
Specifications
System
Frequency response
Nominal dispersion
Maximum SPL
Crossover type
Crossover frequency
Transducers
Limiter
Magnetic shielding
Amplifier
Maximum output power*
Type
Protection
Connectors
Inputs
Sensitivity for max out with
Level control at 5
Input impedance
Maximum input level
Outputs
User controls
SRM 10A
40 Hz – 30 kHz ±6 dB
90° conical @ -6 dB point
116 dB
2 way, active
1.2 kHz
1 x 10" (254 mm) paper pulp cone with
twin roll impregnated fabric surround
2" (52 mm) edge-wound voice coil
1 x 1.3" (33 mm) aluminium/
magnesium alloy dome with edge-
wound voice coil
Independent high and low frequency
limiters
No
600 W
LF: Class-D HF: Class AB
Short circuit, thermal
1 x XLR / 1/4" TRS combo jack, balanced
/ unbalanced
1 x RCA, unbalanced
XLR: +4 dBu / RCA: -10 dB V,nominal
XLR: 11 kΩ unbalanced / 22 kΩ
balanced, RCA: 11 kΩ unbalanced
+20 dBu
Link: 1 x XLR, balanced
Power on / off, level, treble roll off,
treble energy
SRM 12A
38 Hz – 30 kHz ±6 dB
90° conical @ -6 dB point
121 dB
2 way, active
1.2 kHz
1 x 12" (300 mm) paper pulp cone
with twin roll impregnated fabric
surround
2" (52 mm) edge-wound voice coil
1 x 1.3" (33 mm) aluminium/
magnesium alloy dome with edge-
wound voice coil
Independent high and low
frequency limiters
No
600 W
LF: Class-D HF: Class AB
Short circuit, thermal
1 x XLR / 1/4" TRS combo jack, balanced / unbalanced
1 x RCA, unbalanced
XLR: +4 dBu / RCA: -10 dB V,nominal
XLR: 11 kΩ unbalanced / 22 kΩ balanced, RCA: 11 kΩ unbalanced
+20 dBu
Link: 1 x XLR, balanced
Power on / off, level, treble roll off,
treble energy
71
Quick Start Guide
SRM 15A
35 Hz – 30 kHz ±6 dB
90° conical @ -6 dB point
126 dB
2 way, active
1.1 kHz
1 x 15" (380 mm) paper pulp cone
with twin roll impregnated fabric
surround
2" (52 mm) edge-wound voice
coil
1 x 1.3" (33 mm) aluminium/
magnesium alloy dome with
edge-wound voice coil
Independent high and low
frequency limiters
Power on / off, level,
treble roll off, treble energy,
presence energy