Descargar Imprimir esta página

pelipal H-156 Serie Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Dear Customer,
we are glad that you have chosen our LED-Mirror.
Our LED-Mirrors are subject to strict quality control. If your mirror still does not work
properly, we regret this very much. Please contact your dealer.
Please read the safety instructions, the care instructions as well as the instruction
manual before the installation, and before the first commissioning.
The observance of all above mentioned instructions are the prerequisite for a safe use
and a long life of the mirror.
Package contents of
1 x LED-Mirror with LEDs, transformer and supply and wall mount
2 x screw for wall mount
specifications
primary connection:
secondary connection:
power Watt:
protection class:
lamp:
light electricity:
light color:
lifetime:
WARNING: steam tension
All power supply lines may be exchanged only by a certified electrical expert taking
under the IEC 60364.
The installation of the mirror may only occur to an electrical expert with knowledge of
DIN VDE 0100-part 701 and national laws and rules.
The source of light is not interchangeable.
Structural changes and adjustments lead to the extinction of the guarantee and legal
liability.
IMPORTANT note:
By installation on the wall please respect the use of suitable fixing materials (dowels
for right wall material) and in wall obstructed electric lines.
Before cleaning the mirror, all stream power supplies should be interrupted.
We recommend to mount the mirror with two persons to avoid any damages.
Please do not place the mirror on hard sub-surface, because the edges and corners
can burst by light connection to hard undergrounds.
220 – 240 V, 50/60 Hz
12 V, Max 1 A, Max 15W
(50x70) max 15 W, (70x70) max 15 W
(90x70) max 15 W, (110x70) max 15 W
II / IP44
LED
(50x70) 490lm, (70x70) 650lm,
(90x70) 780lm, (110x70) 900lm
6500 K
30.000 h

Publicidad

loading

Este manual también es adecuado para:

980.835026980.837026980.839026980.831126