Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
HANGER ASSEMBLY
7. Align the hole at one end of a short hanging bar (I)
with the sleeve under the front of the arm (F). From
the outside, insert an M6 x 45 mm bolt (CC) through
an M6 washer (JJ), through the short hanging bar (I),
through a plastic washer (MM), through the sleeve
under the arm (F), through an M6 washer (JJ) and into
an M6 nut (HH). Do not tighten completely. Attach the
long hanging bar (J) to the back of the arm (F) using the
same procedure. Repeat this step for the remaining
long hanging bar (J) and short hanging bar (I).
Hardware Used
M6 x 45 mm Bolt
CC
M6 Nut
HH
M6 Washer
JJ
Plastic Washer
MM
8. At each end of the seat assembly, bring the holes
in the free ends of the hanging bars
together and thread them onto an "S" hook (Q).
9. Hang the "S" hooks (Q) from
the loops on the top frame bar (A).
7
x 4
x 4
x 8
x 4
8
9
7
J
I
F
MM
CC
JJ
JJ
Q
J
I
Lowes.com/gardentreasures
HH
A
P
Publicidad
