Legal compliance and Warning
.
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect it
until the problem is resolved.
.
This device does not have any serviceable parts.
representatives.
Signaling method: This device does not dial out.
Ringer Equivalence Number: The FCC Registration label (on the device) includes a Ringer Equivalence Number (REN) which
is used to determine the number of devices you may connect to your telephone line. A high total REN may prevent telephones
from ringing in response to an incoming call and may make placing calls difficult. In most areas, a total REN of 5 should permit
normal telephone operation. To determine the total REN allowed on your telephone line, consult your local telephone company.
Hearing aids This device does not convert the signal for human hearing.
Programming Emergency numbers: This device does not dial out.
Important safety instructions
When using the device, basic safety precautions should always be followed to reduce risk of fire, electrical shock and injury to
persons including the following:
1.
Read and understand all instructions.
2.
Follow the warnings and instructions marked on the product.
3.
This device is installed in a computer. This work should be done by a qualified computer technician.
4.
Avoid using during electrical storm. There may be a remote risk of electrical shock from lightning.
5.
CAUTION: Do no use sharp instruments during installation procedure to eliminate the possibility
of accidental damage to the device, the computer or the cord.
6.
Save these instructions.
Europe EC Declaration of Conformity
We:
MCDI Security Products Inc.
7055 Jean-Bourdon Avec
Montreal, QC
Canada H4K 1G7
Declare under our sole legal responsibility that the following products conform to the protection requirements of council directive
89/336/EEC on the approximation of the laws of member states relating to electromagnetic compatibility, as amended by
directive 93/68/EEC:
The products to which this declaration relates are in conformity with the following relevant harmonized standards, the reference
numbers of which have been published in the Official Journal of the European Communities:
EN50082-1:1992 --- EN55022 CLASS A --- EN 60555 PARTS 2 & 3 ---EN41003:1993 --- BAPT Note 48 revision 5
EN60950/IEC Ed 2 Amendment No1 1992, Amendment No2 1993, Amendment No3 1996
Signed this 7th day of December 2011
MCDI Security Products Inc.
Europe EN41003 Warning Application Note 48, Issue 5EN41003 Warning Application Note 48, Issue 5EN41003 Warning
Application Note 48, Issue 5
1) The power required by the host and the total of all adapter cards installed within the host environment, together with any
auxiliary apparatus, shall not exceed the power specification of the host apparatus.
The power requirements for the D4 receiver are:
MCDI SECURITY PRODUCTS INC.
MCDI Security Products Inc.
7055 Jean-Bourdon Avenue., Montreal, QC, Canada H4K 1G7
Telephone: +(514) 481-1067 Fax: +(514) 481-1487
MCDI - D4 alarm receiver
7055 Jean-Bourdon Montréal Québec Canada
Operating guide for Alarm Receiver Decrypta 4
Repair or exchange must be made by the manufacturer or its
+514.481.1067 www.mcdi.com d4@mcdi.com
58|67