Jackery Explorer 300 Plus Manual De Instrucciones página 5

LCD DISPLAY (Jackery Explorer 300 Plus)
16
17
18
1
2
3
1
Input Power
4
Car Charging Indicator
7
Remaining Battery Percentage
10
Low Temperature Warning
13
Energy Saving Mode
16
WIFI
EPS: Emergency Power System.
Once you have connected the mains and the AC input port of the EPS via the AC charger cable,
you can use the AC output port of the EPS to power your unit (at this point the AC power comes
from the mains, not the EPS battery). In the event of a sudden loss of mains power, the EPS can
automatically switch to battery mode within 20ms. Since this is a non-professional UPS function, it
does not support 0ms switching. Do not connect to equipment with high uninterruptible power
requirements such as data servers and workstations. Please test several times to confirm
compatibility before use and it is recommended to connect to only one device. Do not use more
than one unit at a time to avoid triggering the overload protection. Failure to follow these
instructions may result in equipment failure or loss of data for which we cannot be held responsible.
Battery Power Indicator
When the product is being charged, the orange circle around the battery percentage will light
up in sequence. When charging other devices, the orange circle will stay on.
Low Battery Indicator
When the battery is less than 20%, the Low Battery Indicator will stay on. When less than 5%, the
Low Battery Indicator will flash. When it is being charged, the Indicator will be o .
4 5 6
7
2
Remaining Charge Time
5
Solar Charging Indicator
8
Error Code
11
Remaining Discharge Time
14
AC Power Indicator
17
Bluetooth
8 9
10
3
AC Wall Charging Indicator
6
Low Battery Indicator
9
High Temperature Warning
12
Output Power
15
Battery Power Indicator
18
EPS
US
15
14
13
12
11
03