Yissvic MK1000-UL Manual De Instrucciones página 4

BEFORE THE FIRST USE
The milk frother can be used for finishing the following tasks separately:
I. Frothing and heating milk, froth thick foam.
II. Frothing and heating milk, froth thin foam.
III. Only heating separately, without frothing.
IV. Only frothing separately, without heating.
Note:
• Before using your milk frother, clean all the parts according to the section
"CLEANING AND MAINTENANCE".
• Do not use skim milk to froth, it can't produce milk foam.
• Please use whole milk or semi-skimmed at refrigerator temperature to
CLEANING AND MAINTENANCE
Always disconnect the milk frother from the power outlet before cleaning.
CAUTION:
Do not rinse the milk frother surface.
Do not rinse the milk frother base.
Do not immerse the jug in water.
All parts of this milk frother are not dishwasher safe.
(1) Take out the whisk, and rinse the whisk in warm water.
(2) Clean the inner jug immediately after each use, or the milk foam will solidify on
the jug. Rinse the inner jug with mild detergent and water and then wipe with a
soft damp cloth.
(3) Clean the lid with water and mild detergent. Rinse thoroughly and dry.
(4) Wipe the surface with a soft damp cloth.
Capacity
The amount of milk to be heated or frothed shall be complied with the requirement
shown in Figure. 1.
-EN.03-