CLEANING AND MAINTENANCE
EN
Important: Always disconnect the appliance before cleaning or disassembling.
Never submerge the appliance or its electrical parts into water or any other
liquid. Do not use detergents or abrasive pads to clean the appliance.
• Clean the lid and the ground coffee holder in warm, soapy water.
• Over time, color from coffee beans may stain on to plastic detachable parts of
the appliance. This is normal and does not affect the performance. They may
be cleaned by soaking them in mild bleach (non-abrasive) straight after use.
• To remove the burr, first remove the protection cap by twisting the lock anti
clockwise, and pull it up. Remove the burr by twisting it clockwise and pulling
it upwards to remove.
• Carefully clean the inside space of the upper bean container using the
included cleaning brush afterwards wipe the space with a damp cloth.
• Reinstall the burr and the protection cap.
• Carefully clean the ground coffee dispenser and the body of the appliance
using a damp cloth.
• Regular maintenance of your coffee grinder is recommended to preserve
optimal performance throughout the product's lifecycle.
• If the knives inside the grinder are heavily covered by coffee bean powder
it may be necessary to use coffee grinder cleaning pellets to achieve good
cleaning results.
INSTRUCTION MANUAL · DAILY
8