• This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices, and other working environments
• Farmhouses and by clients in hotels, motels, and other residential-type environments
• Bed and breakfast type environments
• Catering and similar non-retail applications environments
• This appliance is designed for indoor use only.
•
WARNING! Any electrical components (plug, power cord, compressor and etc.) must be
replaced by a certified service agent or qualified service personnel. Contact our support team
for help.
•
WARNING! The light bulb supplied with this appliance is designed explicitly for this
appliance and should not be used in any other device, lamp, or similar application outside of its
intended use in this machine.
• The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only
electrical outlet. Do not lengthen or shorten the cord. The power cord of the appliance is
equipped with a three-prong grounding plug for your protection against electrical shock
hazards. It must be plugged directly into a properly grounded three prong receptacle. The
receptacle must be installed in accordance with local codes and ordinances.
• Make sure you have quick access to the outlet the appliance is plugged into in case of an
emergency where disconnection is quickly needed.
• Make sure the appliance is plugged into a wall main outlet and not into any power strip or
similar device.
• Do not pull on the main power cable.
• If the power socket is loose, do not use it for the appliance under any circumstance as it may
result in electric shock or fire.
• You must not operate the appliance without the lamp (if applicable to your unit).
• This appliance is heavy. Care should be taken when moving it. Team lift is recommended.
• Avoid prolonged sunlight exposure to the appliance.
DAILY USE
• Do not put hot objects or devices on the plastic parts in the appliance.
• If the appliance is left empty for long periods, switch off, defrost, clean, dry and leave the door
open to prevent mold developing within the appliance.
CARE AND CLEANING
• Before maintenance, switch off the appliance and disconnect the power plug from the main
socket.
• Do not clean the appliance with metal objects.
INSTALLATION
• IMPORTANT! For electrical connection, carefully follow the instructions given in the
following points.
• The refrigerator must be disconnected from the source of electrical supply before attempting
the installation.
• Only use accessories as indicated and not for any other use.
• Remove all protective plastic before using the appliance.
• Unpack the appliance and check if there is any damage to it. Do not connect the appliance if it
is damaged. Report possible damages immediately to the retailer you purchased from. In the
case of any damages, keep the packaging for proof.
• We advise waiting at least four hours before plugging in the appliance to allow the oil to flow
back into the compressor.
6