Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1. To separate ramp into two sections, first place
1
folded ramp with handles facing up. Make
sure hook-and-loop straps have ramps secure.
Rotate red pin toward center joint hinges.
B
2. Using handles, carefully slide ramp sections
2
apart. Your ramp can now be carried in two
sections and stored in a safe place.
B
3. To connect ramp sections together, first place
3
both ramp sections side by side near location
where ramp will be placed. With handles facing
up and hinges on same end, align hinge pins
and carefully slide ramp sections together.
Rotate red pin to right. Release hook-and-loop
straps and lay straps toward bottom side of
ramp. Ramp is now ready to use.
B
1.
To separate ramp into two sections,
first place folded ramp with handles
facing up. Make sure hook-and-loop
straps have ramps secure. Rotate
red pin toward center joint hinges.
A
2.
Using handles, carefully slide ramp
sections apart. Your ramp can now
be carried in two sections and
stored in a safe place.
A
3.
To connect ramp sections together,
first place both ramp sections side
by side near location where ramp
will be placed. With handles facing
up and hinges on same end, align
hinge pins and carefully slide ramp
sections together. Rotate red pin to
right. Release hook-and-loop straps
and lay straps toward bottom side
of ramp. Ramp is now ready to use.
A
4
7
1
B
2
B
3
B
Publicidad
