Maintenance And Cleaning - BLACK&DECKER EasyEdge BDPE200-LA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

f As required, wipe excess paint from the edges of the paint
applicator.
f If the paint applicator is sliding on the surface, apply less
paint by turning the flow control knob (3) to a lower
numerical setting.
f When not in use, pull the plunger (10) drive to the back
of the main body (1) of the paint edger and clip it in place.
f When leaving the paint edger unattended for a longer
period of time, wrap the paint applicator in a plastic
bag to prevent drying, removing as much air as
possible from the bag.
f Make sure the type of paint you use can be cleaned
with a warm water and soap solution.
Returning excess paint to paint can.
f Pull the plunger drive (10) to the back of the main body
(1) of the paint edger and clip it in place.
f Slide the paint tube (8) out of the main body (1) of the
paint edger.
f Hold the paint tube (8) over the paint can and gently push
down on the plunger (9) to return paint to the can.
Note: Do not store paint in the paint tube.

MAINTENANCE AND CLEANING

Your Black & Decker cordless appliance has been
designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory
operation depends upon proper appliance care and
regular cleaning.
Warning! Before performing any maintenance or
cleaning on cordless appliances switch off and remove the
batteries from the appliance.
f The paint applicator should be removed when storing
the product.
f Wipe the paint edger main body using a soft damp
cloth.
f For stubborn marks you can use a mild solution of
soap and water to dampen your cloth.
f Paint applicator and paint tube can be washed in
warm soapy water, however this will have a negative
effect on the performance of your tool. To maintain the
highest level of performance the paint applicator and
paint tube should be replaced after every job.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or
other qualified service personnel, always using identical
replacement parts.
ACCESSORIES
Caution! The use of any accessory or attachment not
recommended may be hazardous.
The performance of your tool depends on the accessory
used. Black & Decker accessories are engineered to high
quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
f Accessory numbers BDPE1020-LA
Recommended accessories for use with your tool are available
from your local dealer or authorized service center.
MAINTENANCE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
ACCESSORIES
Recommended accessories for use with your tool are
available from your local dealer or authorized service
center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
v
PROTECTING ThE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
household waste. Make this product available for
separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical
products from the household, at municipal waste
sites or by the retailer when you purchase a new
product.
ENGLISh • 19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easyedge bdpe200-ar

Tabla de contenido