Texi Black Turbo Manual Del Usuario página 22

Texi Black Turbo 22
OPERATION
1. Remove the water tank from
the appliance, unscrew the cap,
fill the tank with clean water,
screw the cap on.
Use demineralized water.
2. After filling the water tank,
put it back in the appliance.
3. Connect the appliance to a
220-240V power socket.
4. Press the power button to
start the appliance – a lamp will
light up. The appliance will be
ready for use after about 2
minutes, when the pressure on
the pressure gauge reaches
approx. 4.5 bar.
www.TEXI.info