Warning:
Be very careful when packaging wet food, as liquids can be released when slightly pressed
and these liquids can reach the vacuum port, which can cause malfunctions in the device.
How to seal bags without vacuum sealing (without removing air from the bag)
1. Insert the food you want to package in the bag. You can use a ready-to-use bag or you
can make one as explained in the previous section.
2. Place the edge of the bag in the vacuum chamber and leave at least 8 centimetres
between it and the bag's contents as shown in figure 8. For larger foods, you will need to
leave more space.
3. Close the lid and press both of its sides until you hear a closing sound.
4. Press the sealing button. The button's light indicator will light up.
5. After the bag is sealed (no light indicator should be on), open the lid by pressing the
opening buttons on both sides. Remove the bag.
How to seal jars
3. Connect one end (thinner piece) of a suction tube into the air suction hole and the other
end into the jar opening (thicker piece with rubber at the base for easy sealing).
4. Press the packaging button so that the appliance extracts all the air. Press the button
again for sealing when you think sealing is finished.
Warning
Please note that if a plastic jar reduces the air inside the jar too much, this can lead to
cracking of the jars.
Please note
The jar is not included.
4. CLEANING AND MAINTENANCE
Unplug the appliance from the mains and let it cool down before cleaning it.
-
-
Use a soft, damp cloth to clean the surface of the appliance.
Never immerse the appliance in water or other liquids.
-
-
Do not use abrasive sponges, powders, or cleaning agents to clean the appliance.
Make sure no moisture is inside the appliance.
-
-
Do not use sharp objects to remove any of the stickers or components of the appliance,
as this may damage it.
-
Clean the sealing strips with a damp cloth. Make sure that the appliance is dry before
using it again.
ENGLISH
SEALVAC EASY MAGNETIK
29