Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Star Bright Chest of Drawers
L5355
Assembly Difficulty
two-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Could we do better?
If there is anything you think could be improved in these instructions or in the
assembly of this product we'd be grateful if you could let us know; we'll pass
any helpful hints and tips on to other customers via our website and update
the instructions.
All you need to do is drop us a line at instructions@gltc.co.uk
V1
Thank you
29/04/2022
1

Publicidad

loading

Resumen de contenidos para Great Little Trading Star Bright L5355

  • Página 1 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and painless as possible. Star Bright Chest of Drawers A few important pointers before you start: L5355...
  • Página 2 AVERTISSEMENT! WARNING! AFIN D’ÉVITER TOUT RENVERSEMENT, CE PRODUIT DOIT ÊTRE IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE UTILISÉ AVEC LE DISPOSITIF DE FIXATION MURALE FOURNI. Veuillez USED WITH THE WALL ATTACHMENT DEVICE PROVIDED. consulter les informations supplémentaires dans le manuel de montage et Please see further information in the assembly manual and on the back panel.
  • Página 3 WARNUNG! ¡ADVERTENCIA! UM EIN UMKIPPEN ZU VERHINDERN, MUSS DIESES PRODUKT MIT DER PARA EVITAR VUELCOS, ESTE PRODUCTO DEBE UTILIZARSE CON EL MITGELIEFERTEN WANDBEFESTIGUNG VERWENDET WERDEN. Weitere DISPOSITIVO DE FIJACIÓN A LA PARED PROPORCIONADO. Consulte Informationen finden Sie in der Montageanleitung und auf der Rückseite. más información en el manual de montaje y en el panel posterior.
  • Página 4 Component Check List Component Check List Component Check List x1 Top Drawer Divider Panel x1 Horizontal Divider Panel x4 Drawer RH Sides x2 Large Drawer Backs x1 LH Side Panel x1 Lower Drawer Divider x2 Large Drawer Base Panels x1 LH Small Drawer Front x1 RH Side Panel x1 Base Plinth x1 RH Small Drawer Front...
  • Página 5 Component Check List Assembly: PANEL A PANEL A POSITION 1 POSITION 2 Ensure that this hardware hole closest to the short edge is at x4 #1 Flat Runner x4 #2 Flat Runner the top. x4 RH L-Shaped Runners x4 LH L-Shaped Runners x20 Wooden Dowels x18 Screws 20mm...
  • Página 6 Hardware for Step 2: Hardware for Step 3: 2x #5 Wooden Dowels 3x #1 Flat Runners 2x #6 Screws 25mm 9x #12 Screws 12mm The small drill holes on the 3x #7 Cam Dowels edge of Panel B to be facing up. Note: BASE Use the smaller holes...
  • Página 7 Hardware for Step 4: Hardware for Step 5: 3x #2 Flat Runners 4x #5 Wooden Dowels 9x #12 Screws 12mm 3x #8 Cam Locks 3x #7 Cam Dowels BASE Use the smaller holes when attaching the runner. Start with the first small next to the wheel.
  • Página 8 Hardware for Step 6: Hardware for Step 7: two-person step 4x #5 Wooden Dowels 4x #5 Wooden Dowels 4x #9 Barrel Nuts 3x #8 Cam Locks 4x #10 Bolts 42mm BACK FRONT Rounded corners to face the floor. STEP 7: Please note: two people required for this step. BASE Insert 4x barrel nuts (#9) and 4x wooden dowels (#5) into the ends of panels (E) STEP 6: Secure the second side panel (E ) by inserting 4x wooden dowels (#5)
  • Página 9 Hardware for Step 8: Hardware for Step 9: 6x #7 Cam Dowels 6x #5 Wooden Dowels 6x #8 Cam Locks BACK FRONT Rounded corners to face the floor. STEP 8: Locate top panel (G) and insert 6x cam dowels (#7). STEP 9: Insert 6x wooden dowels (#5) to the top panel (G) and slot into the unit ensuring that the grooved edge is facing up.
  • Página 10 Hardware for Step 11: Hardware for Step 10: 12x #11 Screws 16mm 8x #7 Cam Dowels D D D STEP 10: Locate 2x back panels (H) and place within the recessed groove of the STEP 11: Prepare the large drawers by inserting 4x cam dowels (#7) to large panels ensuring that the pilot holes on panels (H) line up with the pilot holes in the drawer front (I).
  • Página 11 Hardware for Step 12: Hardware for Step 13: 4x #4 L Shaped Runner 4x #3 L Shaped Runner 12x #12 Screws 12mm 12x #12 Screws 12mm STEP 12: Locate 4x LH drawer side panels (J) and secure runner (#4) with 3x STEP 13: Locate 4x RH drawer side panels (K) and secure runner (#3) with 3x screws (#12) where indicated.
  • Página 12 Hardware for Steps 14 + 15: 8x #6 Screws 25mm 8x #8 Cam Locks STEP 14 + 15: Construct the large drawer by attaching side panels (J and K) to the large drawer back panel (L) as shown with 4x screws (#6). Ensure that the runners are on the outer side of the side panels and that the wheels on the runners are at the back of the drawer.
  • Página 13 Hardware for Step 16: Hardware for Step 17 4x #6 Screws 25mm 8x #7 Cam Dowels 4x #8 Cam Locks STEP 17: Construct drawer N by attaching side panels (J and K) to back panel (Q) as shown with 4x screws (#6). Ensure that the runners are on the outer side of the side panels and that the wheels on the runners are at the back of the drawer.
  • Página 14 Please refer to the instructions in the kit provided and on the next pages for further panel (O) guidance. Your unit is now complete. Copyright© 2016 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.