Publicidad
Hardware for Steps 14 + 15:
8x #6 Screws 25mm
8x #8 Cam Locks
L
#6
J
#8
#6
#8
STEP 14 + 15: Construct the large drawer by attaching side panels (J and K) to the
large drawer back panel (L) as shown with 4x screws (#6). Ensure that the runners
are on the outer side of the side panels and that the wheels on the runners are at the
back of the drawer.
Slide in the drawer base panel (M) into the grooves and insert 4x cam locks (#8) into
the hardware holes at the front of the drawer. Then slot in the drawer front panel (I)
and secure the 4x cam locks (#8) with a philips screwdriver.
Please repeat step 14 for the second large drawer.
#6
#6
K
#8
#8
M
I
x2
The drawers are complete.
12
Publicidad
