Create RETRO Manual De Instrucciones página 10

ISSUE
The device does not work
If the problem is not resolved or there are other types of failures, contact our technical
service.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
E NGL I SH
10
PROBLEM RESOLUTION
CAUSE
The plug is not properly inserted
into the outlet.
The cable is defective.
Lack of power.
Disconnection of the motor pro-
tection caused by continuous and
prolonged use of the device.
SOLUTION
•
Insert the plug into the outlet.
•
Do not use adapters or exten-
sions.
•
Make sure the main circuit brea-
ker is on.
Contact your service representa-
tive.
Make sure the main circuit brea-
ker is on.
Wait 15/20 minutes for the motor
to cool down.