TOOL FEATURES
1. Sleeve 3 in. O.D. x 2.56 in. L
2. Sleeve 3.4 in. O.D. x 2.56 in. L
3. Sleeve 3.6 in. O.D. x 2.56 in. L
4. Sleeve 4 in. O.D. x 2.56 in. L
5. Adapter Plate 2.17 in. O.D.
6. Adapter Plate 2.32 in. O.D.
7. Adapter Plate 2.48 in. O.D.
8. Adapter Plate 2.62 in. O.D.
9. Adapter Plate 2.76 in. O.D.
10. Adapter Plate 2.81 in. O.D.
11. Adapter Plate 2.87 in. O.D.
2
1
8
19
18
SAFETY GUIDELINES / DEFINITIONS
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting
steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest
product information available at the time of publication. The manufacturer reserves the right to make product changes at any time
without notice.
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain
this product. Failure to comply with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this product:
DANGER: Indicates an imminently hazardous situation
that, if not avoided, WILL result in death or serious injury.
WARNING: Indicates a potentially hazardous situation that,
if not avoided, COULD result in death or serious injury.
UNPACKING AND INSPECTION
After opening the carton, unpack your new product and related parts and accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against
the photograph on carton. If any parts are missing, please call customer service at 1-800-497-0552
between 6 a.m. and 5 p.m. Pacific time.
2
4
3
6
7
11
10
9
17
12. Adapter Plate 2.89 in. O.D.
13. Adapter Plate 2.95 in. O.D.
14. Adapter Plate 3.05 in. O.D.
15. Adapter Plate 3.21 in. O.D.
16. Adapter Plate 3.27 in. O.D.
17. Adapter Plate 3.48 in. O.D.
18. Sleeve Plate 3.4 in. x 2.72 in.
19. Sleeve Plate 4 in. x 3.2 in.
20. 7/8 in. Forcing Screw
21. Forcing Nut 2.36 in. x 0.875
22. Washers
5
12
15
16
20
CAUTION: Indicates a potentially hazardous situation that,
if not avoided, MAY result in minor or moderate injury.
NOTE: Indicates important information, which if not
followed, MAY cause damage to equipment.
13
14
21
22