AOKE WP-H74T Manual De Usuario página 3

Standing reminder
To activate timer, press «1» and «3» together, the display shows «x.xh».
Then press «↑» or «↓» to adjust the timing.
Timer can be adjusted per half an hour(0.5)
- When the handset is in sleep mode a flashing dot indicates that the timer is running.
- When the timer has reached the programmed time a buzzer will sound five times
and the handset will wake up from sleep mode.
- Now select the desired height by using «↑» or «↓» button.
User settings
The user can choose to change the desk's default settings. In total there are 6
settings that can be changed. These are numbered in the following order
S1 to S-6.
You can change the settings by pressing «S» for 15 seconds. Then select which
setting you want to change, using «↑» and «↓». Then press «S» again to select the
selected user setting. Select the desired setting and confirm it by pressing «S».
S1) CM or INCH
1. Press «S » when on S-1;
2. Then use «↑» or «↓» to select 1 or 0; (0 = CM & 1 = INCH)
3. To save, press «S» again.
S2) Adjust anti-collision sensor sensitivity
1. Press «S » when on S-2.
2. 0: means off, 1: is the least sensitive and 8: is the most sensitive.
3. To save, press «S» again.
S3 & S4) Safety setting, do not adjust before consultation with a professional.
S5) Determine the minimum height display
1. Press «S » when on S-5.
2. Select the minimum height that will be showed on the display.
3. To save, press «S» again.
S6) Determine automatic or manual operation of memory buttons
1. Press «S » when on S-6.
2. 0: means manual placement to the selected height. Keep button 1, 2 or 3
pressed for desired height.
1: means automatic placement to the selected height. Click button 1, 2 or 3 for
desired height.
3. To save, press «S» again.