Publicidad
Idiomas disponibles
Idiomas disponibles
/
OPERATION PROCEDURE
9
18
<FAN SPEED>
Depress the "FAN SPEED" switch.
By depressing the "FAN SPEED" switch, the indication is
changed in the following order;
HIGH
MED
NOTE:
- In case of dry operation, the fan speed is automatically changed and fixed at the "LOW" fan
speed.
- In this case, the fan speed can not be changed (The indication remains at the setting
condition).
<LOUVER ANGLE>
Depress the "AUTO LOUVER" switch.
Every time the "AUTO LOUVER" switch is depressed, the
indication of the louver angle is changed.
Depress the "AUTO LOUVER" switch at the position of
, the indication is changed to
indicates the auto-swing. Depress the "AUTO LOUVER"
switch again, the indication is turned to
NOTE:
- The above indications show the case of setting operation mode for group 4.
- The same setting procedure shall be performed for other groups. In case of the same setting
for all groups, select the group number of "AA".
- The temperature, fan speed and louver angle can be set while the unit is stopped or in
operation.
In Case of 4-Way Cassette Type (Example)
LCD
Indication
Air Louver
Approx.
Angle
25°
Cooling Dry
Heat
NOTE:
- The fixing angle of the louver shown above is the case of 4-way cassette type indoor unit. The
fixing angle is different according to unit model. Refer to the operation manual of each model
for details.
- There exists a time lag between the indicated louver position on LCD and the actual louver
angle in operation. Therefore, when fixing the louver, set the angle according to the indicated
louver angle on LCD.
- When the "AUTO LOUVER" switch is depressed, the louver may not stop immediately.
LOW
The above figure shows the case of
setting "HIGH" fan speed.
and this indication
The above figure shows the case of
setting auto-swing.
Approx.
Approx.
Approx.
Approx.
Approx.
Approx.
30°
35°
40°
50°
55°
60°
Angle Range
Angle Range
:
Recommended Angle
Publicidad
