Lindy 43379 Manual De Usuario página 2

User Manual
Introduction
Thank you for purchasing the USB 3.2 Gen 1 Hub & Gigabit Ethernet Converter. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy USB 3.2 Gen 1 Hub & Gigabit Ethernet Converter allows users to conveniently connect a
laptop or tablet to a Gigabit Ethernet network via a Type C or a Type A USB port and also provides three
additional USB 3.2/3.1 Gen 1/USB 3.0 Type A ports.
This converter is ideal for ultrabooks or tablets which do not feature wired network connectivity and may
only offer a limited number of USB ports.
Package Contents
• USB 3.2 Gen 1 Hub & Gigabit Ethernet Converter
• This Manual
Features
• 3 Port USB 3.2 Gen 1 Hub & Gigabit Ethernet interface
• USB 3.2 / 3.1 Gen 1 / USB 3.0 specification up to 5Gbps
• Complies with IEEE 802.3/802.3u/802.3ab, IEEE802.3az
• Supports Full/Half Duplex Operation
• Interfaces: 1x USB Type C and 1x USB Type A male upstream port, 1x RJ45 female, 3x USB A female
downstream ports
• USB bus-powered
• Compatible with USB Type C and USB Type A equipped computers
Installation
Plug the USB Type C or USB Type A plug of the converter into a free USB port on the computer. Your
computer will recognize the new hardware and install any required drivers automatically.
Connect an Ethernet cable (not included) to the Ethernet port of the converter, then connect the other
end of the Ethernet cable to an available network hub, switch or router.
To use the USB hub, simply connect your USB devices to the USB Type A sockets of the adapter.
English